Rack Mount Industrial Touch Monitor for Control Panels | FPM-3121
Rack Mount Industrial Touch Monitor for Control Panels | FPM-3121
A rack position is only one part of a control-panel display decision. The buyer also needs to align screen size, touch method, video signal, host computer, DC power and the final mechanical drawing. FPM-3121 uses a 12.1-inch TFT panel with 1024 × 768 resolution and 350 cd/m² luminance. It supports rack, VESA, and panel mounting, so a control-panel builder can compare three listed placement approaches before fixing the display architecture.
FPM-3121 is a strong candidate when its display, resistive touch, VGA/DVI inputs, USB touch interface, mounting choices and 12 V DC input fit a separate-host HMI or control-panel design. The host, signal behavior, physical cut-out and touch integration remain project conditions to confirm.
FPM-3121 Configuration at a Glance
| Design item | Confirmed configuration | Why it belongs in the review |
|---|---|---|
| Display | 12.1-inch TFT panel with 1024 × 768 resolution and 350 cd/m² luminance | Establishes the listed display format for the viewing-distance review. |
| Touch | 4-wire resistive touchscreen | Keeps the interaction method explicit in the selection. |
| Video and touch connection | VGA and DVI video inputs plus a USB touch interface | Creates a clear host-and-interface checklist. |
| Mounting | Rack, VESA, and panel mounting | Lets the team compare placement within the panel architecture. |
| Power | 12 V DC input and 12 W power consumption | Connects the monitor to the available DC-power plan. |
| Physical envelope | 313 × 240 × 46 mm dimensions and 3.5 kg net weight | Provides dimensions and weight for the mechanical drawing. |
Choose the Mounting Architecture Before the Final Cut-Out
Rack, VESA, and panel mounting give a control-panel builder different ways to position the display. The right choice depends on available space, viewing position, access for service and the relationship to the separate host computer. Start with the finished enclosure drawing and identify the intended screen location, access route and support structure.
The 313 × 240 × 46 mm dimensions and 3.5 kg net weight give the mechanical team concrete inputs for that review. They do not replace a project-specific check of the rack, panel cut-out, VESA arrangement or enclosure construction. When the intended arrangement changes, a tailored mounting discussion is more productive than assuming a generic installation will fit.
Keep the Host and Display Responsibilities Clear
FPM-3121 is a monitor rather than an integrated panel computer. Its VGA and DVI video inputs plus a USB touch interface make the display-side requirements explicit: the buyer needs to identify the separate host's available outputs and the intended touch connection.
This separated architecture can be useful when a team wants to plan the host computer and display as distinct components. It also keeps a display replacement conversation focused: confirm the signal path, resolution expectation, touch integration and physical mounting alongside the host-system details. Do not assume a connector type alone guarantees video or touch behavior.
Use Touch and Power Details to Qualify the Project
The 4-wire resistive touchscreen should be evaluated against the operator's intended interaction and the project's interface design. The 12.1-inch TFT panel, 1024 × 768 resolution and 350 cd/m² luminance give buyers a documented display baseline to compare with the required viewing distance and information layout.
FPM-3121 uses 12 V DC input and 12 W power consumption. Include the available DC supply, wiring approach and panel power plan in the same request. If the required signal, touch method, mounting, power or display format differs from the standard planning path, ask Univitech to review a tailored configuration or solution.
What to Send for a Control-Panel Display Review
Provide the control-panel drawing, available rack or mounting space, intended screen position, host video output, touch-interface requirement, available 12 V DC supply, application details, quantity, destination and needed documentation. That information makes it possible to review display-side fit without treating a generic monitor choice as a finished HMI design.
FAQ
Can FPM-3121 be rack mounted?
FPM-3121 supports rack, VESA, and panel mounting. Confirm the final enclosure geometry and support arrangement for the project.
What video inputs does FPM-3121 provide?
It provides VGA and DVI video inputs plus a USB touch interface. The separate host's signal and touch behavior should be checked in the system review.
Request a Control-Panel Display Review
Send the mounting drawing, host video output, touch requirement, DC supply, screen-placement objective, quantity and destination. If the standard arrangement does not match, request a tailored display or mounting discussion so Univitech can review the requirement and explore an option.