Industrial PC With Dual LAN for Separate Machine and Service Networks | MPC-2018L
Industrial PC With Dual LAN for Separate Machine and Service Networks | MPC-2018L
Two physical LAN ports can give a machine builder a clearer starting point for separating network conversations, but they do not define a finished network architecture by themselves. MPC-2018L uses an Intel Core i5-4200U processor with up to 8 GB DDR3L memory. Its I/O includes four USB 3.0 ports, two USB 2.0 ports, two RS232/RS485 ports, four RS232 ports, VGA, HDMI, and dual Intel I211 Gigabit LAN ports.
That combination makes MPC-2018L a strong candidate when a project needs to review machine-side and service-side connections alongside local devices, displays, storage, mounting and DC power. The buyer still needs to decide the intended topology, protocol, access policy and software behavior for the system.
MPC-2018L Configuration at a Glance
| Design item | Confirmed configuration | Why it belongs in the review |
|---|---|---|
| Compute | Intel Core i5-4200U processor with up to 8 GB DDR3L memory | Sets the documented compute and memory scope. |
| Network and I/O | Four USB 3.0 ports, two USB 2.0 ports, two RS232/RS485 ports, four RS232 ports, VGA, HDMI, and dual Intel I211 Gigabit LAN ports | Supports a device and connection inventory. |
| Enclosure | Fanless all-aluminum alloy construction | Helps frame compact cabinet and maintenance planning. |
| Storage | mSATA and 2.5-inch SATA storage support | Adds local-storage decisions to the system review. |
| Expansion | One full-size and one half-size Mini-PCIe slot | Identifies listed expansion positions to discuss. |
| Power and placement | 9–30 V DC input; 243 × 144 × 66 mm chassis with desktop or wall mounting | Makes power and enclosure fit visible early. |
MPC-2018L supports Windows 7, Windows 8, and Linux operating-system support. A buyer should use that statement to open a software-fit discussion, not to assume driver or application compatibility.
Treat Two LAN Ports as an Architecture Decision
In an automation system, one network path may be intended for equipment traffic while another supports service access, upstream reporting or a separate project segment. Two physical LAN ports give the design team a hardware basis for that conversation. Before ordering, write down which systems belong on each connection, who needs access, and how the existing machine network is expected to behave.
The dual Intel I211 Gigabit LAN ports work best as part of a full interface map. Include the serial equipment, USB peripherals, local display, cable route and cabinet entry points. That map makes it easier to see whether the chosen port set supports the proposed system without turning a general product specification into a promise of network isolation or cybersecurity.
Keep Local Interfaces in the Same Review
MPC-2018L includes two RS232/RS485 ports and four RS232 ports, which gives legacy-device planning a visible place in the architecture. The four USB 3.0 ports and two USB 2.0 ports broaden the peripheral inventory. VGA and HDMI give a buyer two listed physical display outputs to consider when a local service or operator display is part of the design.
These interfaces matter because a network plan rarely stands alone. A system integrator can avoid late changes by checking each required device, port type, software driver and physical access point before the cabinet layout is finalized.
Fit the Network Plan Into the Cabinet
The fanless all-aluminum alloy construction and 243 × 144 × 66 mm chassis help a buyer place the computer in a compact equipment drawing. Desktop or wall mounting gives the mechanical review a defined starting point. The 9–30 V DC input should be checked against the available project supply and wiring plan before it is treated as a fit.
MPC-2018L also provides mSATA and 2.5-inch SATA storage support, plus one full-size and one half-size Mini-PCIe slot. These details can be reviewed when the project needs to align the local computer with storage or listed hardware-expansion choices. If a changed topology, interface set, enclosure, mounting, power or operating-system condition falls outside the expected configuration, invite Univitech to review a tailored option.
Questions to Include in an RFQ
Provide a diagram of the proposed machine and service connections; the devices and protocols in scope; required serial, USB and display interfaces; software and operating-system needs; storage expectations; mounting space; DC supply; quantity; destination; and documentation needs. A good brief lets the team evaluate the dual-network concept against the actual equipment rather than a generic port count.
FAQ
Does MPC-2018L have two LAN ports?
Yes. MPC-2018L has dual Intel I211 Gigabit LAN ports. The buyer should still define topology, protocol and access requirements for the project.
Can the two LAN ports separate machine and service networks?
They provide two physical network interfaces for the architecture review. The intended network design, security approach, protocol and software behavior need project-specific confirmation.
Request a Dual-Network Architecture Review
Send the proposed topology, connected equipment, interface list, operating-system and software requirements, mounting drawing, DC supply, quantity and destination. If the standard arrangement is not the right match, request a tailored-configuration discussion to explore the requirement.