Industrial Panel PC for Machine Control Cabinet Operator Interface | TPC-2150E
Industrial Panel PC for Machine Control Cabinet Operator Interface | TPC-2150E
A machine-control cabinet often needs a visible operator interface without adding a separate monitor, computer and cable bundle. TPC-2150E is a strong candidate to evaluate when an integrated panel PC fits the architecture. TPC-2150E combines a 15-inch TFT panel with a 5-wire resistive touchscreen, and it uses an Intel Bay Trail J1800 processor with DDR3L memory support up to 8 GB.
The integrated approach is practical when the cabinet team can align screen size, touch method, software, I/O and mounting in one review. TPC-2150E provides four USB 2.0 ports, one Gigabit LAN port, one RS232/RS485 port, one RS232 port, and VGA output, giving the machine builder a clear starting point for device and display planning.
Match the Operator Interface to the Cabinet
Start with viewing distance, panel cut-out, touch method and operator posture. The 15-inch display, 1024 x 768 resolution and 350 cd/m2 luminance establish the documented display basis. Confirm the actual interface layout and application screens with the machine project.
TPC-2150E Configuration at a Glance
| Decision | TPC-2150E detail | Confirm |
|---|---|---|
| Display and touch | 15-inch TFT, 5-wire resistive touchscreen, 1024 x 768, 350 cd/m2 | Viewing distance and touch workflow |
| Compute | Intel Bay Trail J1800; DDR3L up to 8 GB | Workload and software image |
| Storage | 32 GB SSD, options up to 512 GB | Capacity and recovery plan |
| I/O | Four USB 2.0, Gigabit LAN, RS232/RS485, RS232, VGA | Device and display map |
| Expansion | Mini-PCIe with listed 3G/4G module support | Module, carrier and software fit |
| Mechanical | Fanless aluminum-magnesium alloy enclosure; panel and VESA mounting | Cut-out, bracket and access |
| Power | 9-30 V DC through 2-pin Phoenix connector | Supply and protection |
Use Touch and I/O as One Operator-Station Decision
Resistive touch may suit gloved or deliberate operator input, while the USB, serial and LAN ports support a project-specific peripheral map. Treat these as selection variables, not as proof of a particular PLC or HMI package. Send the control devices, connector types and software assumptions for review.
Keep Storage and Expansion in the Cabinet Plan
The 32 GB SSD with listed options up to 512 GB gives the team a defined storage discussion. The Mini-PCIe socket and listed 3G/4G module support can be evaluated when connectivity or expansion is part of the machine brief. Confirm module, antenna, carrier, software and regional requirements together.
TPC-2150E includes a 32 GB SSD with listed capacity options up to 512 GB and one Mini-PCIe socket with listed 3G/4G module support. Treat both as project configuration inputs, not automatic application compatibility.
Mounting and DC Power Complete the Fit Check
Panel and VESA mounting support different cabinet and retrofit layouts. The 9-30 V DC input through a 2-pin Phoenix connector should be matched with the cabinet supply, grounding and startup sequence. Reserve cable bend space and service access before finalising the cut-out.
Configuration Reference
Model scope: TPC-2150E only. Reference type: Univitech official product detail, reviewed July 2026. Display, compute, storage, I/O, expansion, mounting and power details are model-specific; machine software and protocol fit require confirmation.
Request an HMI Cabinet Review
Send the cut-out or VESA drawing, viewing distance, touch workflow, software, CPU load, I/O map, storage, power, quantity, destination and documentation needs. If the standard panel-PC arrangement changes, request a customised configuration discussion at https://www.univitech.com/custom/.
Frequently Asked Questions
Is TPC-2150E suitable for a machine-control operator interface?
It is a strong candidate when the 15-inch resistive touchscreen, compute, I/O, mounting and 9-30 V DC conditions fit the cabinet plan.
What display and touch configuration does it use?
It combines a 15-inch TFT panel with a 5-wire resistive touchscreen, 1024 x 768 resolution and 350 cd/m2 luminance.
Can mounting or connectivity requirements be changed?
Univitech can review changed screen, touch, I/O, expansion, mounting, power or software requirements through a customised configuration discussion.